Jbl-synthesis SDP-25 Manuel d'utilisateur télécharger pdf (Page 3)

JBL SYNTHESIS SDP-25 Front Panel Controls and Indicators

Standby/On Indicator: This LED indicator will light red when the AC mains power is applied and

the rear panel Master Power Switch is turned on. It will turn blue when the unit is turned on from the

front panel Standby/On Switch, the remote control or an external control system.

Standby/On Switch: Press this switch to turn the unit on or place it in the Standby/”Off” mode.

Input Indicators: When an input is selected by pressing a Source Selector button on the front

panel or remote, the LED above it will turn blue to confirm the choice.

Source Selectors: Press these buttons to choose the audio/video input played through the

main room system.

• The eight Source Selector buttons on the left side of the panel select from the HDMI and

analog sources connected to the rear panel jacks.

• The TV Source Selector plays the audio from a TV with Audio Return Channel capability

(ARC) connected to the HDMI 1/ARC output. There is no video associated with this source.

Note that the CEC function must be turned on for this Source to be active. (See Page 10)

• The USB Source Selector plays the audio from a computer or other compatible device

connected to the rear panel USB Audio jack.

• The Front Inputs Source Selector toggles between the devices connected to the front

panel inputs.

Front HDMI Input: Connect the HDMI output of a source device to this jack for playback and

select it by pressing the Front Panel Input Button.

Front Audio Input: Connect an audio source to this jack for playback and select it by pressing

the Front Input Button.

Information Display: This two-line LED display provides status information about your SDP-25.

The top line typically shows the input and the bottom line shows the current surround mode and

volume. When inputs are changed or the menus are in use the information shown will vary.

Infrared Sensor: The sensor behind this window received IR commands from the Remote Control.

Audio Selector: Press this button to choose between the Primary Digital, Secondary Digital or

Analog audio source in use.

Stereo Mode: Press this button to select one of these stereo playback modes:

• Stereo 2.1 plays two-channel audio with bass information going to the subwoofer

• Stereo 2.0 sends a full range audio signal to the left and right speakers and no audio to the

subwoofer

• Party Mode plays stereo sound through all speakers except the Center Channel.

• Stereo Direct sends a two-channel analog audio input directly to the volume control and

outputs without any signal processing or bass management.

Surround Mode: Press this button to toggle through the available surround modes

Zone 2 Video: When the Zone 2 Video option in the Zone 2 Setup Menu is set to "Enable",

pressing this button selects the video source for the second zone. Note that when the Zone 2

Video is active the HDMI Preview feature is not available. See page 17 for more information on

the Zone 2 system.

Zone 2 Audio: Press this button to select the audio input for the second zone. Note that the

audio format cannot be transcoded from one format to another. For example analog sources

may only be output via the analog outputs, optical digital via optical outputs, etc. See page 17

for more information.

Volume Control: Turn this knob to raise or lower the system output level.

FRONT PANEL CONTROLS AND INDICATORS

STANDBY

SDP-25 Surround Processor

Blu-ray

SAT/ CBL Game Media DVR Video 1

Video 2

Video 3

TV USB Front Inputs

HDMIFRONT AUDIO

Audio

Input

Stereo

Modes

Surround

Modes

Zone 2

Video

Zone 2

Audio

VOLUME

Standby/On

Indicator

Standby/On

Switch

Source Selectors Source

Indicators

Information Display

Infrared

Sensor

Audio

Selector

Stereo

Mode

Zone 2

Video

Surround

Mode

Zone 2

Audio

Source

Selectors

Front HDMI Input

Front Audio Input

Volume

Conrol

1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Jbl-synthesis SDP-25 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Jbl-synthesis SDP-25